Warning: Last items in stock!
Victron 12 Volt Battery Charger with 100 Amp Output which can charge 3 Battery Banks Independently. The Victron brand is designed as quality without compromise. The Victron 12 Volt Battery Charger case is an Aluminium epoxy powder coated with drip shield and stainless steel fixings to withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Using the Victron temperature sensors ensures that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions, this ensures that not only are your batteries protected but your charger is providing them the best possible maintenance.
Universal 90 to 265 Volt input voltage range
All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.
Three outputs that each can supply the full output current
Three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current.
Three stage charging, with temperature compensation
The Victron Centaur battery charger, charges at bulk rate until the output has reduced to 70 % of the rated Amps, of which then a 4 hour timer begins. After the timed period the charger switches to float rate to ensure proper maintenance of the battery. An internal temperature sensor is used to compensate the charge voltage with - 2 mV/_C (. 1 mV/_F) per cell. A dip switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries. This switch ensures that once you have selected your battery source that the Victron 12 Volt Battery charger gives your batteries the care they need for a prolonged life without overstressing or charging them.
Maximum Battery charging size 1000Ah.