Warning: Last items in stock!
Victron Blue Power GX 7 Amp 12 Volt IP20 Battery charger is a state of the No Fan high power charger. The No Fan technology means no noise, no moving parts and greater reliability and performance. The Victron Blue Power GX IP20 Battery Charger is designed to handle high temperature increases and it will adjust its performance to ensure it does not fail due to overheating.
The highest efficiency ever!
Setting a new industry standard: with 93% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. So when you are looking for a high tech battery charger with extreme performance consider the Victron Blue Power on the top of your list.
Adaptive 4-stage charge algorithm: bulk – absorption – float – storage
The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. This process ensures that not only do you gain better battery performance but you increase the life of the battery for significantly longer than using a basic charger.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Models up to 12/15 and 24/8: no fan.
Models 12/25 and 24/12: small inaudible low rpm fan, temperature controlled.
Protected against overheating
Output current will reduce as temperature increases up to 60°C, but the Blue Power charger will not fail.
Two LED’s for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)